Kenwood C-616DV User Manual
Quick start guide, Connections, C-616dv
What’s in the Box?
You should fi nd these accessories upon opening the
box.
Quick Start Guide
Compact Hi-Fi Component System
C-616DV
Follow the steps below to use your
Compact Hi-Fi Component System
Connections
Setup
Setup
Setup
Operation
Remote control unit operation
Plug the power cord of the system to a power outlet and
press
on the remote control unit to turn the system
ON. After the system is switched ON, press the desired
operation button. Use the remote control unit by pointing
it to the remote sensor on the main unit.
Remote sensor
REMOTE CONTROL UNIT
Approx. 6 m
30°
30°
AM loop antenna
FM indoor antenna
AC adapter
(AC-18335A)
© B60-5822-08/00 (E)
Power cord
Connections
Connecting the FM antenna
1 Connect the lead to the [FM 75Ω] terminal.
2 Find the location that gives the best
reception.
3 Secure the antenna as high up as possible.
• The antenna supplied with the system is a basic
antenna for indoor use. For stable signal reception, the
use of an outdoor antenna (commercially available) is
recommended. Disconnect the indoor antenna first
before connecting an outdoor antenna.
¤
CAUTION on installing an outdoor antenna
•
Since antenna installation necessitates skill and
experience, always consult your dealer before
installation. The antenna should be placed at a distance
from the power distribution wires. Otherwise, an electric
shock accident may occur if the antenna falls down.
Connecting the AM antenna
1 Connect the AM antenna cord to the [AM] and [
HGND]
terminals.
2 Setup the antenna in the position and the direction to
be able to receive AM broadcast.
• The antenna supplied with the system is for indoor use.
Place it as far away as possible from the system, your
TV set, the speaker cords, AC adapter and the power
cord, and point it in the direction that provides the best
reception.
Connecting the speakers
1 Connect the right speaker to terminal marked “R”, with
the red wire to + and the black wire to –.
2 Connect the left speaker to terminal marked “L”, with the
red wire to + and the black wire to –.
Insert this portion.
• For optimal sound performance, it is recommended to
use the supplied speakers.
• Do not connect more than one speaker to any one pair of
+/– speaker terminals.
¤
Caution for connection
• Do not plug the power cord into the power outlet until
all other connections are completed. Before unplugging
a connected cord or cable, be sure to switch the system
OFF and unplug the power cord from the power outlet in
advance.
Connecting the iPod adapter
• Connect an iPod adapter, which is provided with your
iPod or commercially available in iPod dealers, to the
iPod dock of this unit. Note that the iPod adapter is not
provided with this unit.
1 Insert the iPod adapter into
unit.
iPod dock
iPod adapter
2 Connect your iPod.
To remove the iPod adapter
• Insert a thin object such as the tip of a flat-blade
screwdriver into the slit on the dock adapter and lift it to
remove.
Connecting the HDMI terminal
1 When you use HDMI connection, you can change the
resolution (576p, 720p, 1080i, 1080p) for the HDMI output.
The HDMI will be outputted at 576p resolution, even if
you set the resolution to 576i on the HDMI connection.
• When the no sound or noisy sound are outputted with
HDMI connection, set the HDMI AUDIO in DVD SETUP
menu to PCM.
• If there is noise or lines on the screen, please check the
HDMI cable.
• Not all HDCP-compatible DVI devices will work with this
unit.
• If your HDMI TV does not support HDCP, the blue screen
appears on the screen.
• If the abnormal picture appears on the TV screen, turn off
the unit and then turn the unit on again.
FM
75Ω
iPod Dock
Remote control unit
RC-F0512E
Pull out the plastic protective
sheet before use.
DISPLAY
SLEEP
USB/SD
DVD
STOP
X-BASS
VOLUME
MUTE
D.AUDIO/iPod
AUX
SOUND
V.F.S
BAND
TUNER
AUDIO
SUBTITLE
DVD SETUP
RESOLUTION
STEREO/MONO
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
ANGLE
P.MODE
FOLDER
P.CALL
TIMER SET
ZOOM
RANDOM
MEMORY
REPEAT
TIMER
ON/OFF
FILE
SEARCH
PTY
CLEAR
BACKLIGHT
CONTRAST
REMOTE CONTROL UNIT
RC-F0512E
TOP MENU
MENU
RETURN
ON SCREEN
ENTER
VIDEO
COMPONENT VIDEO
Y
Cb
Cr
¤
CAUTION
Be sure to adhere to the following, or proper
ventilation will be blocked causing damage or fi re
hazard (Main unit and AC adapter).
• Do not place a cloth on the system or place it on a
carpet or cushion.
• Do not use the system in a poorly ventilated place.
• Do not place any objects impairing heat radiation
onto the top of the unit.
• Leave some space around the unit (from the largest
outside dimension including projection) equal to or
greater than, shown below.
Top panel : 50 cm
¤
CAUTION
The power in this equipment will not be completely
cut off from the wall outlet when the standby switch is
turned off.
Install the equipment so that the wall outlet is easily
accessible and, in case of emergency, immediately
unplug the power plug from the wall outlet.
Mains plug is used as the disconnect device, It shall
remain readily operable and should not be obstructed
during intended use.
AM loop antenna
FM indoor antenna
iPod dock
Right speaker
Left speaker
To AC wall outlet
• Insert the plug firmly
all the way into the
AC wall outlet.
To TV with video input
terminal
Video cord
Component Video
cord
Component Video cord
Video cord
HDMI cord
Power cord
AC adapter
Use the AC adapter (AC-18335A)
provided with this product.
Connect the audio
output of the VCR, etc.
to the [AUX IN] terminals
on the rear of the main
unit.
Connect a subwoofer (SW-40HT
(separately available), etc.) to the
[SUB WOOFER PRE OUT] terminal
on the rear of the main unit.
B60-5822-08_00_C-616DV_QuickStart.indd 1-3
B60-5822-08_00_C-616DV_QuickStart.indd 1-3
09/10/01 15:25
09/10/01 15:25