Operation with video components, Playback of videotape, 3 play the vcr – Kenwood UD-900M User Manual
Page 68: Recording of video source, Connect the video component to be re, Corded, 2 select the corresponding input source, 3 play the video source component, Put the vcr in the record mode, Listening to cd or tape sound while watching video
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operation with video components
Please refer to page 12 for the connection of Audio /
Visual components.
For the connections and operations, also read care
fully the instruction manuals supplied with the video
components to be connected.
Playback of videotape
'*1 Switch the power of the monitor TV ON.
2 Set the input selector to VIDEO mode.
Lights up.
O FIX O LD
Press repeatedly,
3
Play the VCR.
Recording of video source
^ Connect the video component to be re
corded.
i A video player deck, video camera, LD player, DBS
tuner, etc., can be connected.
2 Select the corresponding input source.
OFIX © O VIDEO
Press repeatedly.
3 Play the video source component.
Put the VCR in the record mode.
Listening to CD or tape sound
while watching video
Select the video component the image
" of which is to be viewed.
O
FIX CLLD p VIDEO
Only one of
them lights up.
INPUT
f,
Press repeatedly.
2 Press the VISUAL FIX key.
Lights up.
0,
O
LD
O
VIDEO
3 Select the audio source to be listened to.
Press repeatedly.
Only the audio source is switched over while the image
being displayed remains the same.
Play the selected video and audio com
ponents.
VISUAL FIX key
You can use this function to lock in a selected video input (LD /
AUX, VIDEO). Once a video input is selected and VISUAL FIX is
ON, the video signal will not change even if the input selector is
switched to another video input.
• FIX
o
LD
O
VIDEO
O
F^
VISUAL HX
0<
4.
• FIX
Press again to cancel.
3UD-900/UD-900M (En)