Dolby 3 stereo, Dolby 3 stereo adjustment, Remote control unit only – Kenwood UD-900M User Manual
Page 25: I set the dolby 3 stereo mode, Select the center mode, Turn on the test tone, Adjust the center speaker volume, 0 stop generating the test tone, Dolby 3 stereo playback, Set the dolby 3 stereo mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DOLBY 3 STEREO
The Dolby 3 STEREO provides a active center chan
nel to produce a better, stable center image. This
mode can be used when listening to stereo video
program and music or when surround listening or
surround system set-up is not possible.
■ Dolby 3 STEREO adjustment
|Remote control unit only|
"I Set the Dolby 3 STEREO mode.
Light up
B 1
Select the center mode.
[3
Every time the key is pressed,
the center mode is switched.
I HUL
NORMAL WIDE
Set the center mode to NORMAL if using a small cen
ter speaker, or set to WIDE if using a medium-sized or
larger speaker.
Turn on the test tone.
Adjust the center speaker volume.
(T) Press the TEST TONE key.
TESTONE
Pressing the
I
TEST TOI^ key once
moves the noise-like test tone between
speakers every two seconds (for use in
adjustment), and pressing the key
twice moves it every second (for use in
checking).
The test tone is turned off by the third
press.
(
2
)
Adjust the volume.
Adjust the center level.
L spk C : spk R spk
'i
rawTER
MULTI LEVH. '
COWTBDL
Select CENTER
Adjust
' Adjust so that the level of the center speaker is equal to
that of the left and right speakers.
0 Stop generating the test tone.
TEST TOME
Dolby 3 STEREO playback
" ]
Set the Dolby 3 STEREO mode.
15
This function cannot be activated in TUNER mode.
2 Check the center mode.
NORMAL WIDE
Set the center mode to NORMAL if using a small cen
ter speaker, or set to WIDE if using a medium-sized or
larger speaker.
Play a stereo software program or a
Dolby surround program.
4 Adjust the volume and tone.