Kenwood UD-900M - Manual (Page 21)

Audio adjustment
PHONES jack METER MODE key
Press the POWER key
of the power amplifier.
Stand by indicator
■ The POWER key on (
the power amplifier ^
can switch on / off
the powers of main
system.
ir
Remote control unit
Adjusting the volume
POWER key S. W. OUT key
Adjusting the !eft and right vol­
ume balance
Compensation of bass sound
N.B. CIRCUIT: Natural Bass Circuit
• Usually set the switch to the center position.
• Adjust to obtain a more natural bass sound.
Selecting the input source
Press repeatedly, or
press and hold.
The input source changes in
the following sequence:
->TAPE-------- > MD/DAT
i
- LD/AUX <------VIDEO
Remote control unit
CD TUNER
O CD
a cfi
VIDEO LD/AUX
□ □
STAND BY mode of POWER switch
When the power cord of this system is plugged into an AC
outlet, the preamplifier / tuner display and power amplifier stand
by indicator light up regardless of the ON/OFF setting of the
POWER switch. This Indicates that a small amount of current is
being supplied to the unit to back up the memory contents. This
mode is referred to*as the Stand By mode. While the display is
lit, the power of the system can be switched ON / OFF from the
remote control unit.
Automatic play operation function associated
with input selector key of preamplifier / tuner
The selected input source starts playing automatically when the
input source by simply pressing the input selector key (TAPE,
TUNER, CD) is selected. It also allows to select a correct input
selector key on the amplifier by simply starting playback on the
desired input source component.
The same operation is also possible with the input selector keys
on the remote coatrol unit.
The input source selected at the moment the power is switched
ON is the last source (TUNER, CD, etc.) selected before
switching the power OFF.
UD-900/UD-900M (En) 21