Canon W8200 - Manual (Page 90)

Printing from a Macintosh
12
4-12
Canceling a Foreground Print Job
Follow the procedure below to cancel a print job in the foreground. When
you cancel a print job in the foreground, the print-in-progress dialog box
opens.
1
When the print-in-progress dialog box opens, press and hold down
the Command key and press the period (.) key.
The print job is canceled.
2
If the Online lamp on the printer operation panel is flashing, indicating
that the job is still in progress, press and hold down the Online button
to display “Pause” on the operation panel, then press the Cancel
button for over 0.5 second.
The print job in progress is canceled.
3
If the Data lamp goes off and you cannot cancel the print job, hold
down the Power button for 1 second or more until the Online lamp
goes off and release it, then after the printer switches off, switch it on
again.
If you switch off the printer, all the print jobs received by the printer and
currently in progress are erased completely. You will need to restart any job
you need to print.
Enter Cancel
Cut Sheet
Roll Media
Paper Source Data Message Power
Online