Canon W8200 - Manual (Page 102)

Using the Operation Panel
10
5-10
Menu Settings Summary Tables
The menus provide the functions listed and described in the tables below.
Settings marked with an asterisk (*) in the tables are the initial or default
values.
Main Menu
Menu Item Available Settings Function
Head Cleaning
Head Cleaning A Cleans the printhead.
Head Cleaning B Re-fills the printhead with ink.
Force Cutting *1 Yes*, No
Cuts the roll media at the current position
under the cutter. However, when the media
is within 10 cm (4 in.) of the leadig edge,
the media is cut after it loads as far as the 10
cm (4 in.) position.
Auto Feed *2 Yes*, No.
Selects automatic feed for the Media
Take-up Unit.
Take-up Reel Disable*, Enable
Sets the operation for the Media Take-up
Unit. When “Enable” is selected, the cutter
is automatically switched off.
Cut Sheet Type *3
(Dye ink printer)
Plain Paper*, Coated Paper,
Heavy Coated, Glossy Paper,
Photo Glossy, Photo Semi-Glos,
Glossy Film, Back Print Film,
Proofing paper, Special 1
~
5
(Pigment ink printer)
Heavy Coated*, Photo Glossy,
Photo Semi-Glos, Syn. Paper,
Adh. Syn. Paper, Back Light Film,
Flame-Res. Cloth, Special 1
~
5
Selects the type setting for cut sheet
media.
Roll Media Type
(Dye ink printer)
Plain Paper*, Coated Paper,
Heavy Coated, Glossy Paper,
Photo Glossy, Photo Semi-Glos,
Glossy Film, Back Print Film,
Proofing paper, Special 1
~
5
(Pigment ink printer)
Heavy Coated*, Photo Glossy,
Photo Semi-Glos, Syn. Paper,
Adh. Syn. Paper, Back Light Film,
Flame-Res. Cloth, Special 1
~
5
Selects the type setting for roll media.
Rep. Ink Tank No*, Yes
Sets the printer in the replace ink tank
mode.