Canon W8200 User Manual

Page 149

Message Is Displayed

7-17

Media Too Large

Problem 1: The loaded media is larger than any media size allowed for loading in the

printer.

Solution:

Set the correct size media then try again. (

Æ P.2-8, P .2-19)

Media Skewed

Problem 1: The loaded media is skewed.

Solution:

If roll media is in use, open the upper cover, raise the paper release lever,
open the roll media tray, take-up some of the media manually to correct the
skew then try again. (

Æ P.2-8)

Solution:

If a cut sheet is in use, open the upper cover, raise the paper release lever,
remove the cut sheet, set it again then retry. (

Æ P.2-19)

Media Too Small

Problem 1: The loaded media is smaller than any media size allowed for loading in the

printer.

Solution:

Set the correct size media then try again. (

ÆP.2-8, P.2-19)

Media Jam

Problem 1: Media has jammed in the printer.

Solution:

Remove the jammed media then press the Online button. (

Æ P.7-19)

Incorrect Media

Problem 1: The media type specified by the printer driver does not match the value for

the media in the paper feed source.

Solution:

Confirm the type of media loaded in the printer, then select the media type
with the operation panel. (

Æ P.2-18 , P.2-26)

Solution:

Pause the print job, use the printer driver to correct the media type so it
matches the loaded media, the re-start the job.