Canon W8200 User Manual

Page 130

Text mode
Original mode

Maintenance

6-24

Important

z The nozzles under protective cap 2 (c) are covered with ink. Handle the printhead

carefully to avoid touching these nozzles or dropping the printhead and causing ink
stains.

z When handling the printhead, always hold it by the grips (a) on the left and right

sides of the printhead.

z To prevent damaging the printhead or poor printing results , never touch the

exposed nozzles (e) or electrical contacts (f) on the printhead.

z Never try to re-attach the protective caps or packing material removed from the

printhead. Discard these items immediately in compliance with local regulations
regarding the disposal of such items.

With the nozzles pointing down and the electrical contacts facing the
printer, insert the new printhead into the carriage.
Handle the printhead carefully so its nozzles do not touch the carriage, then
press down to ensure that it is installed completely.