Canon W8200 - Manual (Page 55)

High Quality Printing on Film
27
2-27
Important
High Quality Printing on Film
By adjusting the height of the printhead before printing on glossy film or
other film base media, you can achieve superior quality image printing.
When you want to increase the precision of printing, or if you need eliminate
coarse texture in the print, follow the procedure below.
• Adjust the height of the printhead. ( Æ P.2-27)
• Select the correct setting for the media type. ( Æ P.2-8, P.2-19)
• Align the printhead. ( Æ P.2-30)
• Execute the print job. ( Æ Chapter 3, “Printing from Windows”, Chapter
4, “Printing from a Macintosh”)
• After completing the special print job, return the printhead height to its
original setting and re-align the printhead. ( Æ P.2-30)
z When adjusting the height of the printhead, you must also align the printhead.
Otherwise, the print job will not achieve the best results.
z When printing on glossy paper, or any other glossy base media that wrinkles easily,
to avoid damaging the printhead, never print with the printhead in the down
position.
Adjusting Printhead Height
1
Press the Online button to display “Offline”.
Enter Cancel
Cut Sheet
Roll Media
Paper Source Data Message Power
Online