Canon W8200 - Manual (Page 127)

Replacing the Printhead
21
6-21
Important
3
Press or to select “System Setup” then press .
“System Setup” menu opens.
4
Press or to select “Replace P.head” then press .
5
Press or to select “Yes” then press Enter.
“Please Wait” is displayed, and the preparation for printhead replacement
begins. Preparation requires about 3 minutes.
When preparation is finished, “Open UpperCover” is displayed.
6
Open the upper cover.
z To avoid soiling your hands or damaging the printer, never touch any part inside
the printer unless instructed to do so.
z Check the carriage cover, printhead lock cover, and the printhead lock lever. If one
or more of these items is dirty, clean them with a damp cloth before you replace the
printhead.
M A I N M E N U
S y s t e m S e t u p
S y s t e m S e t u p
R e p l a c e P . h e a d
R e p l a c e P . h e a d
Y e s