Canon W8200 - Manual (Page 120)

Maintenance
14
6-14
Important
Cleaning the Paper Restraint
To achieve the best performance with this printer, use plain paper to clean
the reverse side of the paper restraint when the print side or reverse side of
the media is dirty, or at least once a month.
Before starting this procedure, prepare some plain paper (or any media other
than film).
z Use a sheet of plain paper for the cleaning, a cut sheet or a cut from a roll of plain
paper that does not shred easily. The reverse side of film has a tendency to hang up
and shred and could cause poor printing if used in this cleaning procedure.
1
Press and hold the Power button for 1 second or more until the Online
lamp goes off, release the button, then switch the printer off.
2
Disconnect the power cord from the power source.
Enter Cancel
Cut Sheet
Roll Media
Paper Source Data Message Power
Online