Casio fx-5800P - Manual (Page 70)

E-69
Register the general term:
E
(This displays the table range screen.)
Input Start = 2 and End = 6:
2E6E
Create the sequence table:
E
(This displays the sequence table screen.)
k
Sequence Calculation Precautions
The following functions cannot be used during sequence calculations.
• CALC
• SOLVE
• Coordinate conversion (Pol(, Rec()
•
d / dx (, d 2
/ dx 2
(,
∫ (, Σ (
• Independent memory add and subtract (
l, 1l(M–))
• Assignment of values to variables (
1~(STO))
• Multi-statement input
Sequence Table Generation Errors
• A sequence table can have up to 199 lines. A Range ERROR occurs if a table range
setting causes this to be exceeded.
• A “Memory Full” error also occurs if the calculator runs out of calculation result memory
while performing a sequence table calculation.
Math ERROR during Sequence Calculation
If a Math ERROR occurs during sequence table calculation, the sequence table screen
appears on the display with “ERROR” in the cell that generated the error.
Equation Calculations (EQN)
k
Equation Calculation Overview
This section shows the general operational procedure for solving simultaneous linear
equations with two unknowns. Natural display is used for this procedure.
X + 0.5Y = 3
2X + 3Y = 4