Brother Fax-410M - Manual (Page 93)

V. Advanced uses
1. RESOLUTION
Single resolution
transmission
I
FINE
\S.RNE
I
PHOTO
START
There are four different resolution settings available - STANDARD,
FINE, SUPER FINE and PHOTO. The STANDARD resolution is
adequate for sending ordinary text documents. FINE resolution is
intended for the transmission of graphic images. SUPER FINE is for
use with finely-detailed graphic images such as complex line
drawings
and similar artwork. PHOTO resolution mode is
specifically designed for the transmission of photographic images.
Whichever mode you use, the quality of the printed document's
text will not be adversely affected.
You can select a resolution setting in two ways. Firstly, you can
press the
RESOLUTION key on the key panel prior to sending your
document and light the LED corresponding to the resolution mode
you want to select. Your document is then transmitted using the
same resolution mode you have selected. Secondly, you can use the
CURRENT SETTING function to select a resolution setting for each
page of a document individually. Both setting methods will be
effective for one transmission only. If the receiving fax machine
caxuiot print
at
the resolution that you specified, traiisiiiission will
take place at a lesser resolution. (The resolution LEDs change to
show you which resolution is being used to print the current
document or page that you are sending is beixig priixted.)
- "Super Fine'
machines.
resolution can only be used between Brother
- If no LED is lit, the unit is in standard resolution.
Place your document in the document feeder and dial the number
as you do for an ordinary fax transmission. Before pressing the
START key select a resolution by pressing the RESOLUTION key.
Press once for FINE mode, twice for SUPERFINE and three times
for PHOTO mode. Pressing the
RESOLUTION key fourth time
returns the machine to the standard resolution mode. There are
three LED lights positioned next to the
RESOLUTION key to
indicate the current resolution setting. If all three are not lit, the unit
will transmit at the standard resolution. For each of the other three
resolution modes, the appropriate light comes on when the mode
has been selected.
When you have selected the resolution mode press the ST A RT key.
Your document will be sent at the specified resolution.
After transmission has been completed the unit reverts to standard
resolution mode. Ihe three resolution LEDs are not lit.
V-1-1