Brother Fax-410M - Manual (Page 118)

V-9. SENDING FAXES FROM MEMORY (only for FAX-500M)
9. SENDING FAXES FROM MEMORY (only for FAX-500M)
Sending a fax from
memory
MEMORY
nn ECM
To save time when transmitting a fax you can first store the
document in the memory and then transmit it from the machine's
memory.
1) Set the document face down in the feeder.
F A X E N T E R FA X N0 .
C O P Y P R E SS C O P Y K E Y
2 ) Press the MEMORY/ECM key once. You are prompted to enter
the fax number of the destination. The display also informs you
what percentage of memory is left for storing your transmission.
If you want to transmit with ECM, press Memory/ECM Key three
times. (The ECM LED is lit and the percentage of memory
remaining is shown on the LCD.)
E N T E R F AX N O . 1 0 0 %
START
3) Enter the destination fax number using the number keys, a one-
touch, a speed dial, or a Telephone Index.
Press the START key. The document is now scanned into
memory.
M E M O R Y 9 8 %
4) When all documents have been stored, the unit sends the
document from memory automatically.
- Vow can store up to 14 pages of documents (Brother standard
chart) into memory, but this may vary, depending on the contents
of the documents.
- When the memory is full, you can select to either send the stored
data out of the memory, or to cancel the transmission.
- If the memory becomes full while the first page of a document is
being scanned into memory, the message "MEMORY FULL
PRESS STOP KEY" appears on the screen. Press STOP key and
cancel the transmission.
V-9-1