Brother Fax-410M - Manual (Page 72)

ÎV-2. SENDING A FAX
• Memory (only for FAX-500M): This allows you to send
documentes) from memory, (see page V-9-1)
• ECM (only for FAX-500M): This is error correction mode which
checks the integrity of a fax transmission while it is in progress
and takes corrective action, (see page V-10-1)
• Confidential mailbox (only for FAX-500M): This allows you to
send a document which will be stored in the receiving unit's
memory until the receiving party inputs an access code. (See page
V-13-1)
Redialing If the number that you have dialed is engaged you can redial it
without having to re-enter the number. There are two different
ways of doing this, depending on whether you are using manual or
automatic transmission.
Automatic redialing Automatic redialing can only be used for faxes that were sent using
automatic transmissions - not for telephone calls. You can turn
automatic redialing on or off (see page IV-1-10).
When using automatic transmission to send a fax, if the destination
number is engaged, the machine will automatically redial the
number up to three (3) times at five (5) minutes intervals,
- Before using automatic redialing, you can send a different fax
message or make a copy of a document using the "Interrupt"
feature.
(See page V-15-1.)
- To cancel automatic redialing, press FUNCTION key, then press
the 9 key to enable the "Cancelling a Transmission "function.
(See page V-16-1.)
Manual redialing
HOOK
or
If you are manually sending a fax or using the unit as a telephone
and you obtain a busy signal, carry out the following procedure.
1 ) Replace the handset or press the HOOK key.
HOOK
or I
2 ) Pick up the handset or press the HOOK key.
IV-2-5