Connecting the handset – Brother Fax-410M User Manual
Page 41
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

II1-3. ASSEMBLING THE HANDSET
3. CONNECTING THE HANDSET
1) Insert the handset line cord into the base of the handset as
shown. Listen for the click which will indicate that the plug \s
securely in position.
2) Draw the handset line cord through the gap provided to
prevent the cord from being pinched between the base and the
fax unit. Set the fax unit on its side, so the slot for sliding the
handset base into position is accessible. Insert the handset into
the slot provided. Insert until the handset base is fixed in
position.
This manual is related to the following products: