Brother Fax-410M User Manual
Page 153
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ERROR MESSAGES
If the error message on the LCD reads "MACHINE ERROR
EA", this may indicate that document was removed from
the feeder while transmission was still taking place.
When you are making a transmission, this message indicates
that either the other party is busy or that no response has
been received. If you have turned the Auto Redial function
ON (see page IV-1-10), the machine will automatically try
the number again after a few minutes. If you have selected
to turn the Auto Redial function OFF, this transmission
will be unsuccessful and transmission verification report
(busy) will be printed out.
When you are the receiving party, this message will indicate
that certain functions—password on the FAX-410/500M,
and the confidential mailbox and relay broadcasting on
the FAX-500M—carmot be enabled because the sending
party's machine is not a Brother machine.
This may indicate that the incorrect ID number (for
password, password plus, and secure polling on the FAX-
410/500M,
and
the
confidential
mailbox,
confidential
mailbox retrieval, or relay broadcast request on the FAX-
500M) was used when the sender made his transmission.
Contact the sender to verify that your ID codes match up
correctly. A transmission verification report (error) will be
printed out.
This may also occur if you have entered the wrong ID code
when attempting to print out a confidential message from
the memory on a FAX-500M. Double check the ID and try
the operation again.
This message may indicate that either the sending or the
receiving party has interrupted the fax transmission (or
reception) operation. If you are the sender, this may also
indicate a missed telephone line connection due to an ID
mismatch or the receiving party being unprepared for
polling, and so on. In such circumstances, check with the
receiving party to learn what is happening at the other end
of the line.
C O M M E R R O R X X Y Y
This message indicates that some communication error has
taken place. "XX YY" represents the error codes used to
provide more detailed information about the error. Refer
to the list shown below.
VI-7