Cleaning the printing area – Brother Fax-410M User Manual
Page 158
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CLEANING THE PRINTING AREA
CLEANING THE PRINTING AREA
First, unplug the machine. Open the unit, and remove the roll of
recording paper from inside the machine.
When cleaning the printing head, use the slip of paper provided
with the machine. Wet one end of the paper slip with isopropyl
alcohol, and insert it under the guide until it will enter no further.
Then continuité across the unit as shown in the illustration, inserting
the paper so the entire head is cleaned with the alcohol. (Either side
and both ends of the paper slip can be used for cleaning the printing
area.)
VII-2
This manual is related to the following products: