Brother Fax-410M - Manual (Page 69)

IV-2. SENDING A FAX
Manual transmission
2
To transmit a document manually, set the document face down in
the document feeder. The following screen appears:
F A X E N T E R F A X N O .
C O P Y P R E S S C O P Y K E Y
Either press the HOOK key or pick up the handset. Now dial the
number of the destination using one-touch, speed. Telephone
Index, or manual dialing. When you hear the answering fax tone
press the
START key and, if necessary, hang up the handset.
The document is drawn through the machine automatically.
Upon successful completion of the transmission the machine will
beep.
- Auto Redial is not effective for manual transmission.
- Only the following current settings are effective for manual
transmission:
• Resolution
• super COVERPAGE
• Call Reservation
- In case of dialing by Telephone Index, before pressing HOOK key
or picking up the handset, you should select the number from the
Telephone Index, (see page TV-8-1)
Points to
Remember When
Sending a Fax
Bear in mind the following points whenever you send a fax.
• Adjusted the guides located on either side of the document, if it
is less than 8.5inches/216mmwide. (Min. width5.8 inches/148
mm).
• Do not send documents on any of the following types of paper:
- Thick paper
- Very thin paper, such as tissue or tracing paper
- Wet, wrinkled, torn, curled, or slick paper
- Thick photographic or coated paper
- Paper with tape or staples, or with metal or textiles attached
If you must send a document on any of these types of paper, copy
them first with a photocopy machine and then use the copies to
send your faxes. (Do not make your copies on this convergence
copier, as the paper restrictions for the fax function apply to the
copier as well.)
IV-2-2