Brother Fax-410M - Manual (Page 86)

IV-6. CHAIN DIALING
6. CHAIN DIALING
Setting chain dialing
In addition to the one-touch and speed dialing functions available
on the unit, a further convenient option called "chain dialing" can
be used with either of the quick dialing functions.
When you send an automatic-transmission, the machine allows
you to use a single one-touch dial or speed dial number. However,
if you register a one-touch or speed dial as a "chain dialing"
number, the machine allows you to use two different one-touch or
speed dial numbers (a chain dial number followed by a one-touch,
speed dial number or manual dialing (within 20 numbers)).
When dialing overseas fax or telephone numbers, there may be
situations in which a company can offer you better rates than the
telephone company you normally use. Chain dialing lets you
choose the telephone company whose line charge is lower if you
register the access code to a second telephone company as a chain
dial number. This is also important when using a telephone credit
card.
Instructions on how to use this option are provided below.
When you register a one-touch or speed dial number, simply press
the CHAIN key before entering the number.
{@mark appears on the screen. @means “chain dialing.”
After that, the procedure is the same as for one-touch or speed dial
numbers.
- You can register numbers with up to 19 digits.
- You cannot send a transmission using chain dialing only. A one-
touch, speed dialing number, or manual dialing (within 20
numbers) number must also be used.
IV-6-1