Connecting your fax to the power outlet – Brother Fax-410M User Manual
Page 49
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
III-6. CONNECTING YOUR FAX TO THE POWER OUTLET
6. CONNECTING YOUR FAX TO THE POWER OUTLET
Important
The machine must always be connected to the power outlet
before you connect it to a telephone line.
Similarly, when moving the unit, the telephone line connection
should be removed before unplugging the power cord. This is
because the machine relies on the ground from the plug to
protect you from any hazardous electrical conditions occuring
on the telephone network.
This machine can be plugged into any standard grounded power
outlet. Make sure the socket is grounded and that it is not on the
same line as any large appliances or office machines such as
refrigerators or photocopiers. The power requirements for this fax
machine can be found in the
Specifications
section on page VllI-
8
-
1
.
There is no ON /OFF switch. When the machine is plugged in, the
date/time
display appears
on
the LCD.
You
can set the
correct
Lime
and date on this display by following the instructions on page IV-
4-1 in the section
Configuring the machine.
- When the machine is plugged in, the recording paper will he fed
through the automatically.
III-6-1