Brother INTELLIFAX 820MC - Manual (Page 83)

/^AS/C SETUP
MtbbAGE CENTER SETTINGS
Activating the Message Center
Now that you have selected the type of memory usage you need (see page 8-1) and recorded your
outgoing message (see page 8-6), you are ready to turn your Message Center on, when you leave
your home or office.
To activate Message Center .....
AUTO Press MODE on the control panel until both the “AUTO” and “F/T” lights are
f-IWSGCTR ^
IP F/T
...Then you can easily identify which Message Center mode you are in by viewing the Message
Center indicator lights. (See page 8-1 for explanation.)
How Do I Know Messages Have Been Received? ________________
Once you return home or to the office you can easily and quickly ecc if any voice or fax messages
have been stored in the Message Center. There are two ways to determine if messages are stored.
(1) If the TAD and /or FAX indicator lights are flashing, there is a new message stored.
(o:- means flashing.)
meMaxM Cente/i
TAD COMBO PAX
-:<3—’—
RECORD ERASE
D C
PLAY
C ) C_3
(2) The LCD display will indicate the number of TAD and/or FAX messages stored.
(See page 8-10 for playing ICM.)
(See page 8-17 for printing faxes.)
(WSJwffMffi
.
*1
'What Happens 'When the Memory Is Full...
If the memory becomes full when you have set your fax machine to Message Center
mode, the machine will automatically change to F/T mode. (LED lights do not
change.) In this mode, the fax machine can automatically accept incoming faxes.
Then, if your fax machine should run out of paper, answer mode will automatically
shift to manual mode. In manual mode the call is not answered, so your caller will
know to try again later.
Out of Recording Paper and Memory Full
[Answer Mode] MSG CTR Mode ► F/T Mode Manual Mode
Memory Full Out of Recording Paper
and Memory Full
8-7