Change 2■exit 1, Tlephone function settings – Brother INTELLIFAX 820MC User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
tLEPHONE FUNCTION SETTINGS
HGipful Hints
1. Print the All Dial List to make sure you have stored the correct numbers. (See
page 11-3.) This list will contain the type of number: FAX, TEL, F/T, or CHAIN.
2. Even if there should, be a loss of electrical power to your fax machine,
the telephone and fax numbers you have stored will not be lost
FOR YOUR INFORMATION
When You Wish to Change the Stored One-Touch and Speed-Dial
Numbers (During Step 4 on Page 4-4, 6, 8)
When you access the function for a One-Touch key or Speed-Dial number, that is
already in use, you will be asked if you wish to change it or to exit and select a
different One-Touch or Speed-Dial number. This display does not appear if the One-
Touch key or Speed-Dial number you chose is not assigned.
1.
Press
1
to assign a new number to the One-Touch key or Speed-Dial number, or
press
2
to choose
a
diffexent One-Touch
key or Speed-Dial number.
c
f
* 0 5 : N J O F F I C E
О
[ 1 . C H A N G E 2 ■ E X I T
1
2. If you are replacing an existing number with a new one, the old number and name
will
appear
hx
the display. Press CLEAR to erase
the
old
number and name. Then,
enter the new number and name and press SET to store the entry.
Memory Storage
Your fax machine is equipped with an internal battery that will keep the memory
working for up to two hours after power has been cut off. After that time, the date and
time will be lost and you will have to re-enter the information. All other settings in
the SET AUTO DIAL, USER OPTIONS and SETUP SYSTEM functions are stored
permanently and will be retained even in the event of a power failure. (See page 8-
21
. )
Helpful Hints
If your fax machine is connected to a PBX, you may need to insert an additional
number before each fax or telephone number to access an outside line.
4-7