Kt^tlvilnqi l-axes and other calls, B) remote activation what is remote activation, What is remote activation – Brother INTELLIFAX 820MC User Manual
Page 69: B) remote activation, For your information
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
/jno/o
Kt^tlVIlNQi l-AXES AND OTHER CALLS
"
... ■■?■■ ■»■ ■»■■ »■■» ■■'
..... J
- :::-5
-ii ■. ■ ...
' ’E" ' ' si' .:'.
...."I" .3 .SM' V . '
^
7 ." .ir.::;:-
Helpful Hinfs
Even the ring volume is set OFF, during F/T ringing and Call Reservation, it
will ring with LOW volume.
FOR YOUR INFORMATION
Reception into Memory
If the paper roll becomes empty, the LCD will display the message “PAPER ROLL
EMPTY”. Simply load a new roll of paper. (See page 1-2.)
Your fax machine will automatically store any incoming faxes in its memory if it runs
out of paper. The contents of the memory will be printed when you replace the paper
roll. Please see “Memory Back-up of Message Center
Memory” (page 8-21).
B) REMOTE ACTIVATION
What is Remote Activation
If you are using a touch tone phone, you can remotely activate or deactivate your fax machine from
an external phone (a phone connected to your fax machine) or from an extension phone (a phone
connected to the same line as your fax machine).
FOR YOUR INFORMATION
Connecting an External or Extension Telephone to the Unit
You may connect an external or extension telephone to your fax machine, as shown
below. Use the “EXT.” jack'on your fax machine.
Alternatively, you may wish to use this “EXT.” jack to connect a telephone answering
device (TAD).
If the external telephone is in use, the warning message “EXT. TEL IN USE” will be
displayed. When the handset on the fax machine is picked up, an alarm will sound.
Yon can dtscnnnect the external phone and switch to the fax machine by pressing
HOOK.
7-7