Brother INTELLIFAX 820MC - Manual (Page 25)

vy.'ro'^KttiN M^Ubl^AMMING AND HELP KEY
Alternating Displays for On-screen Programming (OSP)
ШШттхтщМхМ'.
c
Э
ALTERNATE
3
:)
When you see alternating displays, the LCD will
usually alternate between the currently selected
option, and a help message giving brief instruc­
tions on how to proceed. The example shows the
current speaker volume is high and prompts you
to use (left arrow) and (right arrow) to alter
the setting, and then to press SET to store it.
Help Key
Press this key whenever you need a quick reference Help List printed. This Help List will give
you information on how to perform settings for a function, how to register information, or how to
get some basic information for sending or receiving faxes. When you don’t have the owner’s
manual with you or when you want some information quickly, you can press HELP to get a list
of basic operating procedures.
How to Print a Help List
Just press HELP. You will see the LCD scroll through the available Help Lists. (There are 10
available lists as shown below.) To print out a list, you can wait until the list you want appears
on the display and press SET, or you can just go ahead and press a number 0-8, that corresponds
to the list you want. Finally, you will see “PRESS START KEY” on the display, so press START
and the list will be printed.
Press HELP
Left arrow
sequence
1 -
1 f
f H E L P : . G E N E R A L Гj
t 4
" H E L P :1 . T E M P S E T y)
4 4
Г Н Е С Р : 2
4 4
f H E L P :3
4 4
Г н Е 1 1 Р : 4
4 4
[ H E L P : 5
4 4
1
H E L P : 6
4 4
f
H F I P : 7
4 4
f H E L P : 8
C¥R^L,;:f
4 4
i H E L P ; 0ar#re=RRHr:i:s-|
Right arrow or
auto scroll
sequence
3-6