Brother INTELLIFAX 820MC - Manual (Page 63)

i“MAti) AND OTHER CALLS
iiliiWMiM^BMMlifMilgBMiiliifliHilii^^
iil^Hi
7. RECEIVING FAXES AND OTHER CALLS
A) BASIC SETUP TO RECEIVE FAXES
Selecting an Answer Mode
There are 4 answer modes for your fax machine. You can choose one by pressing MODE
repeatedly until you find the mode you want. Choose one that suits your needs. If you need more
information about a particular mode, refer to the page number given.
{ o means light off. means light on.)
Answer Mode For See Page
1. MANUAL O AUTO
MSGCTR
O F/T
You must answer each call manually.
Use this mode mainly for the telephone use. 7-2
If you want to answer each incoming call, choose MANUAT. rrinrlfi
2. AUTO w AUTO
|—MSGCTR
O FA
Dedicated fax use. Telephone line and fax
line are separate.
7-2
If you use your telephone line exclusively for sending and receiving faxes, you may want to use
AUTO mode. In this mode, you can receive all your incoming faxes automatically.
3. F/T O AUTO
MSG CTR
• F/T
Both fax and telephone use. When you
share one line for your telephone and
fax machine.
7-3
If you want to use your telephone line for both fax and telephone, you may want to choose
F/T mode. In F/T mode, your fax machine will answer incoming faxes automatically.
4. MSG CTR 4P AUTO
(- MSGCTR
di F/T
Use MSG CTR to save voice or fax messages 8-1
while you are out.
- When you want to use your fax machine as a Message Center, choose MSG CTR mode. Please
read Chapter 8. (See page 8-1-25.)
7-1