GE CS975SDSS - Manual (Page 8)

Using the surface units-Knob-controHed models.
Throughout this manual, features and appearance may vary from your model.
OFF
At both OFF and HI the control clicks
into position. You may hear slight
clicking sounds during cooking,
indicating the control is maintaining
your desired setting.
Be sure you turn the control knob
to OFF when you finish cooking.
How to Set
Push the knob in and turn in either direction to
the setting you want.
For glass cooktop surfaces:
A HOT COOKTOP indicator light, on the
cooktop, will glow when any radiant element
is turned on. It will remain on until the surface
is cooled to approximately 150°F.
Indicator light will:
■ Come on when the unit is turned on or hot
to the touch.
■ Stay on even after the unit is turned off.
■ Glow until the unit is cooled to
approximately 150°F.
Dual and Triple Surface Units and Control Knobs (on some models)
The surface unit has 2 or 3 cooking sizes
to select from so you can match the size
of the unit to the size of the cookware you are
using.
On some models.
Models with a Triple Surface Unit only.
On some models.
Temperature Limiter
Every radiant surface unit has a temperature
limiter.
The temperature limiter protects the glass
cooktop from getting too hot. It is normal for it
to cycle when the cooktop is in use.
The temperature limiter may cycle the units off
more frequently for a time if:
■ The pan boils dry.
■ The pan bottom is not flat.
■ The pan is off-center.
■ There is no pan on the unit.