Oven light replacement, Oven heating elements, Care and cleaning of the range – GE CS975SDSS User Manual
Page 36: A warning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Care and cleaning of the range.
Wire cover holder
Oven Light Replacement
Be sure to let the light cover and bulb cool
completely.
To remove the cover.
Hold a hand under the cover so it doesn't
fall when released. With fingers of the
same hand, firmly push back the wire
cover holder. Lift off the cover.
Do not remove any screws to remove the cover.
Replace bulb with a 40-watt appliance
bulb.
To replace the cover.
m
Place it into groove of the light receptacle.
Pull wire forward to the center of the
cover until it snaps into place.
Connect electrical power to the range.
A WARNING
SHOCK OR BURN HAZARD: Before replacing oven light bulb, disconnect the electrical
power to the range at the main fuse or circuit breaker panel. Failure to do so may result
in electric shock or burn.
Oven Heating Elements
Do not clean the bake element or the broil
element. Any soil will burn off when the
elements are heated.
To clean the oven floor, gently lift the bake
element. Clean with warm, soapy water.
36