Carl Goldberg GPMA1956 Eagle 2 ARF - Manual (Page 24)

24
2. From the ½ X 8 X 12", cut a strip 2-1/2" x
12" long. Next, cut a 2" wide strip across the bottom of the
leftover piece.
3. Remove the hatch and put the 2-1/2" wide
foam in the bottom of the fuel tank compartment in the
fuselage.
4. Fold the foam in so that it forms a "Z"
shape.
5. Place the fuel tank down inside the hole
on top of the "Z" folded foam. Fold the 2" foam piece in
half and push it down on top of the fuel tank.
6. Insert both fuel line ends through the holes
on each side of the firewall, forming a loop around the
engine. Place the ends of the fuel tubing on the brass
tubes on the front of the fuel tank, as shown above.
7. With a scissors, cut the fuel line 1" beyond
the carburetor. The shorter line connects to the carburetor
pick up; the longer line goes to the muffler back-pressure
pickup. Replace the hatch.
Replace the hatch on the fuselage.