ALTANA Temp-Chart User Manual

Page 31

and a selection must be made. With “NO Confi-

guration” the Organizer which is already loaded

remains in the Instrument and the Data are sent

to the stick. If another Organizer is loaded, the

Data in the instrument are deleted after trans-

ferring to the USB.Stick.

• Remove the stick from the logger and connect it

to your PC

• In the

temp-chart software

• Select the tab, fill in the connection choices and

press

Step 2:
There may be more than one measurement file on

the stick. Please select the appropriate file(s) and

then fill in the organizer information:

Note that this information is already filled in if the

device was prepared with

temp-chart and the

used organizer does still exist.
As soon as you press Close the selected

measurement(s) is/are imported and opened in the

software.

Read Measurement Data