ALTANA Temp-Chart User Manual

Page 20

Set Oven Specifications

• The Oven Name can be freely chosen
• Enter the speed of your oven in the Speed box.

If you fill in nothing or 0 m/s, the program will be

unable to show a distance axis.
• In the OvenStart box, please enter the time

your oven needs to reach the first „real“ zone. All

data values recorded before this point of time will

then appear on the time axis with a negative sign.

(Note: This offset can also be changed afterwards

by switching to the chart page and moving the

zero zone on the zone axis. Or, you can press the

right mouse button in the area of the temperature

curves and select the command Oven Offset in the

opening context menu.)
• To divide your measurement into Zones, please

additional lines to the zone list. Then, in the table,

enter the zone length as Duration. The zone tables

normally
only show the times, but if you have entered a

speed there, you can also enter the position and

length in meters.
If you want to delete a zone right click in the

number-column and select the desired command.