3 handling and preparation – ALTANA Temp-Chart User Manual

Page 30

Prepare a Measurement

3 Handling and Preparation

3.1 Prepare a Measurement

Connect the temp-gard to the PC or insert the

USB-Stick. Then activate the Instrument tab, make

sure you have selected the appropriate connection

settings and press

Select an organizer in the upcoming dialog and

press OK.
The Organizer will now be transferred to the USB

stick or the connected device and can be used

for new measurements. Already existing QC-

procedures can be selected and linked likewise.

3.2 Read Measurement Data

Step 1:
Measurements can be imported from the

instrument either directly (connected via USB or

the serial Port) or via a transport medium (an USB-

stick in case of a temp-gard 6p or temp-gard-12p,

or a SRAM card in case of temp-gard 8p). The

procedure is almost the same in all cases.
For a temp-gard 12p for example:
• Switch the temp-gard logger on
• Connect the USB Stick to the temp-gard logger
• Data will be transferred to the stick automati-

cally. If there are Organizers on the stick, the

Selection Menu „Configuration Files“ appears