ALTANA Spectro-Guide Sphere Gloss Manual - Manual (Page 60)

59
11.2 Save
From the “File” menu, use the
button to move the cursor to the “Save” option. The
submenu opens when you press the Operate
button. Select “Standard”. Press the Operate button
again. The input menu for the standard name
appears.
You can use the
buttons to select the appropriate letter at the
position of the arrow. Use the
button to move the arrow to the next letter.
When you are finished with the input, press the
Operate button. The menu for entering the
tolerances appears. Enter the appropriate values,
then press the Operate button.
The procedure for storing samples is similar, except
that no tolerances are entered.
You can use the “File/Save/Sample–›Std” function to
save a sample reading as a standard.
std
std
File
Save Standard
f
Display Option
Open
Delete
Mean
Print
f
f
f
f
Sample
Sample->Std
1
File Display Option
Input Tolerances
E* 0 .00
L*-00.50
+00.50
a*-00.50 +00.50
b*-00.50 +00.50
Δ
Δ
Δ
Δ
File Display Option
Input Std Name
STDARD.001
File
std