ALTANA Spectro-Guide Sphere Gloss Manual - Manual (Page 46)

45
10.6 Setup
10.6.1 Auto store
When the “AutoStore” function is activated, the
sample or standard is automatically stored after
each measurement. This function can be toggled on
and off. It is possible to assign a seven-digit name
and a three-digit starting number.
The number is automatically incremented by 1 on
each storing operation. The starting number and
name can be changed, even when AutoStore is
activated.
From the “Option” menu, use the
button to move the cursor to the “Setup” option. The
submenu will open when you press the Operate
button. “AutoStore” is preselected. Confirm with the
Operate button.
AutoStore On
(or off) appears on the display. The sample name is
assigned at the time of the first measurement. The
last name entered always appears as a default. It
can be changed each time the data is stored.
To end the input operation without storing, use the
buttons to exit the input field.
std
File Display
Color sys
Index
Aut o Std
IIIum/Obs
MI Limit
Calibr.
CMC Ratio
ΔE94 Ratio
Configure
Disp Time
Beeper
f
f
f
f
f
Option
AutoStore
Setup f
f Gloss
File Display Option
Input Sample Name
SAMPLE.001
std
Options