ALTANA Spectro-Guide Sphere Gloss Manual - Manual (Page 44)

43
10.4 Illuminant /observer
Here you decide which illuminants are enabled on
the display of the instrument. Chapter 9 provides an
overview of all available illuminants.
From the „Option“ menu, use the
button to move the cursor to the „Illum/Obs“ option.
The submenu opens when you press the Operate
button.
The illuminants which will appear on the display are
indicated by check marks. You can toggle
illuminants on or off by moving the cursor to the
illuminant and pressing the Operate button to make
the check mark appear or disappear.
The number of selected illuminants is unlimited.
Use the
buttons to exit the submenu „Illum/Obs“. The
selection is automatically saved.
How to change illuminants on the display
please refer to Chapter 9.5.
std
std
Options