ALTANA Spectro-Guide Sphere Gloss Manual - Manual (Page 30)

29
Multiple readings
8.1 Storing the mean
From the “File” menu, use the
button to move the cursor to the “Save” option. The
submenu will open when you press the Operate
button. Use the
button to move the cursor to “Sample” and press the
Operate button. The input menu for the sample
name appears. You can select the appropriate letter
at the position indicated by the arrow by using the
buttons. Use the
buttons to move the arrow to the next letter.
Enter a name. After performing this input, press the
Operate button. The mean is stored then.
std
File
Save
Sample
Display Option
Open
Standard
Delete
Mean
Print
f
f
f
f
f
Sample->Std
File Display Option
Input Sample Name
SAMPLE.001
File Display Option
Input Sample Name
SAMPLE.001
saved
std
std
std
The instrument returns to the measuring mode with
calculation of the mean. The name of the stored
mean is displayed at lower left.
The standard measurement can be stored
accordingly using ”Save/Standard”.
92.45
0.46
- 1.45
File Display Option
n=03
L* L* 91.98
a* 0.41
a* b* -1.38
b* D65/10°
SAMPLE.001