ALTANA Spectro-Guide Sphere Gloss Manual User Manual
Page 29
28
Multiple readings
In the default setting, the difference mode is shown
on the display. When multiple readings are
performed, the mean value is shown on the left and
the differences of the mean are shown on the right.
If you like to see the current value, you can select
the “Sample Mode” option from the “Display” menu.
To do this, use the
buttons to place the cursor on the “Display” menu.
Then use the
button to open the submenu. “Sample Mode” is
preselected.
Press the Operate button. The display will change
to show the current value on the left side, while the
right side displays the mean for the measurements
taken so far.
In order to turn off the calculation of the mean, use
the Operate button to confirm the “Off” option on the
“File/Mean/Off” menu.
std
std
File
Display
Option
L*
54.45
L*
- 0.01
a*
-30.46
a*
0.06
b*
-41.55
b*
- 0.08
E
0.10
D65/10°
Δ
Δ
Δ
Δ
Sample
N=01/03
File
Option
Difference
Pass/Fail
Metamerism
Display
Sample Mode
f
f
92.45
0.46
- 1.45
File
Display
Option
L*
L*
91.98
a*
0.41
a*
b*
-1.38
b*
D65/10°
N=02/03