A&D Weighing SV-100H - Manual (Page 89)

87
*1 For the SV-1A/1H when a sample cup of 2 mL is used. For the SV-10A/10H and
SV-100A/100H when a sample cup of 45 mL is used.
*2 Repetitive measurement with the sensor plates remaining in the sample
*3 The value after calibration using a standard viscosity fluid at a temperature range
between 20°C and 30°C with no condensation.
In a measurement that takes a long time, perform calibration using a standard viscosity
fluid or purified water periodically, as necessary.
*4 The unit switches to Pa ⋅s.
*5 The operating temperature of each standard and optional accessory is as follow
Name Temperature used
Sample cup-capacity 45 mL (AX-SV-33), Small sample cup-capacity
10 mL / Small sample cup cover (AX-SV-34), Sample cup-capacity 2 mL
(AX-SV-58)*, Sample cup holder-For capacity 2 mL (AX-SV-56-1/2)
0 to 120°C
Glass sample cup-capacity 13 mL (AX-SV-35), Glass sample
cup-capacity 2 mL (AX-SV-59)
0 to 230°C
Water jacket (AX-SV-37) 0 to 100°C
Glass Storage Container (AX-SV-38)* 0 to 180°C
Plastic Storage Container (AX-SV-39)* 0 to 80°C
* Lid: 80°C max
Take the operating temperature shown above into considerations when using the above
items.