A&D Weighing SV-100H - Manual (Page 82)

80
13. COMMAND LIST (FOR ALL MODELS)
The viscometer can be controlled by the following commands from the computer.
Add a terminator
( 0Dh、0Ah ) to each command.
Command Description
Q Outputs the current data.
SIR Outputs data continuously
C Stops data output by SIR command.
QM Outputs the data during measurement. (Effective only during measurement.)
START Same as the START key
STOP Same as the STOP key
HOLD Same as the HOLD key
MODE Same as the MODE key
PRINT Same as the PRINT key