A&D Weighing SV-100H - Manual (Page 25)

23
4-3-2 SV-10A/SV-10H
Use the MODE key to switch between mPa ⋅s (Millipascal second) and Pa⋅s (Pascal second), or
between cP (Centipoise) and P (Poise).
The unit selected at the factory before shipment is mPa ⋅s.
When the viscosity unit is mPa ⋅s or Pa⋅s:
Unit selected Viscosity
measured m mPa ⋅s Pa⋅s
M mPa ⋅s Display Minimum
display
Unit Remarks Display
Minimum
display
Unit Remarks
0.30 0.0003
⏐
1 1.00 0.0010
｜
9.99
0.01
0.0099
0.0001
Digit
indicating
0.01 mPa
⋅s is
not displayed
10 10.0 0.0100
｜
99.9
0.1
0.0999
0.0001
100 100 0.100
｜
999
1
m mPa ⋅s
0.999
0.001
1000 1.00 1.00
｜ ｜
10000 10.00
0.01
Pa ⋅s Switches
to Pa ⋅s
10.00
0.01
Pa ⋅s
When the viscosity unit is cP or P:
Unit selected Viscosity
measured C cP P
M mPa ⋅s Display Minimum
display
Unit Remarks Display
Minimum
display
Unit Remarks
0.30 0.0030
｜ ｜
1 1.00 0.0100
｜ ｜
9.99
0.01
0.0999
0.0001
10 10.0 0.100
｜ ｜
99.9
0.1
0.999
0.001
100 100 1.00
｜ ｜
999
1
C cP
9.99
0.01
1000 1.00 10.0
｜ ｜
10000 100.0
0.1 P
Switches
to P
100.0
0.1
P
4-3-3 SV-100A/SV-100H
Use the MODE key to switch between Pa ⋅s (Pascal second) and P (Poise).
The unit selected at the factory before shipment is Pa ⋅s.
Unit selected Viscosity
measured Pa ⋅s P
Pa ⋅s Display
Minimum
display
Display
Minimum
display
1 1.00 10.0
｜ ｜
9.99
0.01
99.9
0.1
10 10.0 100
｜ ｜
99.9 999
100 100.0
0.1
1000
1