A&D Weighing SV-100H - Manual (Page 73)

71
SV-1A/SV-1H/SV-10A/SV-10H output format example
Viscosity / Temperature Display Output format example
m mPa ⋅s / °C 1.23 mPa ⋅s ,,,+025.67,C,+00001.23,mPa s
: Space (ASC 20h)
SV-100A/100H output format example
Viscosity / Temperature Display Output format example
Pa ⋅s / °C 1.23 Pa ⋅s ,,,+025.67,C,+00001.23, Pa s
: Space (ASC 20h)
9-4-4 RsVisco Format
Used with the graphing program RsVisco. Measurement data are output in comma separated format.
When a comma is selected as the decimal point by "pnt 1", a semicolon ";" is used as a data separator.
When a measurement is started using RsVisco, the viscometer automatically selects this format.
Measurement data are output in the order of viscosity, viscosity unit, temperature and temperature unit.
The output data are 25 characters long excluding the terminator
With RsVisco format selected, the viscosity value and the temperature are output using the internal resolution.
The relation between the measuring unit and the internal resolution is as follows:
Viscosity Temperature
Model
m mPa･s Pa･s c cP P °Ｃ °Ｆ
SV-1A/SV-1H
SV-10A/SV-10H
0.01 0.0001 0.01 0.0001
Internal
resolution SV-100A
SV-100H
- 0.01 - 0.1
0.01 0.01