KEYENCE DL-PN1 - Manual (Page 9)

7 - PROFINET Communication Unit DL-PN1 User's Manual (GT) -
*1 External input request to the sensor amplifiers connected to the DL-PN1 (Slot 0) can
be executed en bloc. (Smart Access function)
Functions assigned to the external input request 1 to 3 are as follows:
• External input request 1: PRESET input
• External input request 2: TIMING input
• External input request 3: RESET input
Refer to the GT-70A series user's manual.
 Sensor amplifier (Slot 1 to 10)
 Output
Functions assigned to the external input request 1 to 3 are as follows:
• External input request 1: PRESET input
• External input request 2: TIMING input
• External input request 3: RESET input
Refer to the GT-70A series user's manual.
 Communication Methods
The following describes how the I/O controller communicates with the DL-PN1 (data I/O
communication).
•
"Reading an output from a sensor amplifier" (page 8)
• "Entering an external input to a sensor amplifier" (page 8)
• "Reading comparator values (P.V. values) from sensor amplifiers" (page 9)
Address Bit Function name Description Value
1 to 10
0 External input request 1
Requests the external input to the
sensor amplifiers. 0: OFF
1: ON
1 External input request 2
Requests the external input to the
sensor amplifiers. 0: OFF
1: ON
2 External input request 3
Requests the external input to the
sensor amplifiers. 0: OFF
1: ON
3 Reserved for system - -
4 Reserved for system - -
5 Reserved for system - -
6 Reserved for system - -
7 Reserved for system - -