KEYENCE DL-PN1 - Manual (Page 15)

13 - PROFINET Communication Unit DL-PN1 User's Manual (GT) -
*1 Functions assigned to the external input request 1 to 3 are as follows:
• External input request 1: PRESET input
• External input request 2: TIMING input
• External input request 3: RESET input
Refer to the GT-70A series user's manual.
*2 If the judgment value is correct, the parameter range is -199.999 to +199.999.
• When the comparator value is over range, "+999.999" is stored.
• When the comparator value is under range, "-999.999" is stored.
• When the comparator value is invalid, "-999.998" is stored.
• When an error occurs, "+1000.000" is stored.
*3 When you use the calculation function and calculation setting is set to other than
standard difference display, a reading error occurs on the expansion unit.
138 to
143
Reserved for system
144 Revision 1
Stores the revision of slot
number 01 sensor amplifier. 2byte
WORD
R 0101H to FFFFH
: : : : : :
154 Revision 10
Stores the revision of slot
number 10 sensor amplifier. 2byte
WORD
R 0101H to FFFFH
155 to
159
Reserved for system
160
Comparator value 0 (Slot
Number 1)
Used when reading
comparator value (P.V. value)
of slot number 01.
*2 *3
4byte
DINT
R
-199.9999 to +199.9999 : : : : :
169
Comparator value 0 (Slot
Number 10)
Used when reading
comparator value (P.V. value)
of slot number 10.
*2 *3
4byte
DINT
R
170 to
175
Reserved for system
176
Number of decimal places
(Current value 0, Slot
Number 1) Used when reading the decimal
position of slot number 01
comparator value (P.V. value).
4byte
DINT
R
: : : : :
185
Number of decimal places
(Current value 0, Slot
Number 10) Used when reading the decimal
position of slot number 10
comparator value (P.V. value).
4byte
DINT
R
186 to
194
Reserved for system
Index
(DEC)
Function name Description
Data
type
Attribute Value