KEYENCE DL-PN1 User Manual

Page 11

- PROFINET Communication Unit DL-PN1 User's Manual (GT) -

Reading comparator values (P.V. values) from sensor amplifiers

This example shows how to read the comparator values (P.V. values) from the sensor
amplifiers ID01, ID02, and ID03.

(1) When the comparator value of a sensor amplifier is updated, the value of the input

address is also updated via data I/O communication.
If the comparator value is correct, the parameter range is -199.9999 to +199.9999.
If the comparator value is over range, under range, or invalid, the previous value is
retained without updating the comparator value. To confirm whether the current
value is correct, use the comparator value property.

(2) The comparator value invalid, comparator value over range, or comparator value

under range is entered.
If the comparator value of a sensor amplifier is "invalid", "over", or "under", the bit
corresponding to the ID number of that sensor amplifier flips to 1.

(1)

Master

Comparator value under range

Input address 17/24/31 Bit 3 of Slot 1/2/3

Comparator value of ID 01

1234

4567

6789

Input address 19 to 22 (DEX) of Slot 1

Comparator value of ID 02

2345

5678

7890

Input address 26 to 29 (DEX) of Slot 2

Comparator value of ID 03

3456

8901

Input address 33 to 36 (DEX) of Slot 3

Sensor amplifier