Hardy HI 200DNWM DeviceNet Weigh Module User Manual
Page 55
CHAPTER 8 - TROUBLESHOOTING
8-1
CHAPTER 8 - TROUBLESHOOTING
SCOPE
All the information in Chapter 8 pertains to
the troubleshooting and resolution of operat-
ing problems that may occur. All mainte-
nance personnel and users should be familiar
with Chapter 8 before attempting to repair
the HI 200DNWM.
Module LED does
not Come Back on
When Performing
Calibration with
The Button
If the Module LED does not come back on
when performing The Button (C2
Calibra-
tion) it indicates a hardware problem. Con-
tact Hardy Customer Support for assistance.
Module LED is
Flashing Red
Solution: Check all the connections to be
sure they are securely fastened. Reinstall if
any appear to be loose.
Mechanical
Inspection
See Fig. 8-1