Hardy HI 200DNWM DeviceNet Weigh Module - Manual (Page 39)

CHAPTER 5 - SETUP
5-5
• Parameter 22 = Calibrate using C2
®
0 to 1 (Set to True to Complete Com-
mand)
Length in Bytes = 1
• Parameter 23 = Span Weight in Kgs
0.000 to 2147483.647 0.045
Length in Bytes = 4
• Parameter 24 = Set Point One Kgs Value
Read Only
Length in Bytes = 4
• Parameter 25 = Set Point One Deadband
in Kgs
0.00 to 2147483.647 0.045
Length in Bytes = 4
• Parameter 26 = Set Point One Preact in
Kgs
0 to 2147483.647
Length in Bytes = 4
• Parameter 27 = Set Point Two Kgs Value
-2147483.648 to 2147483.647
4535.923
Length in Bytes = 4
• Parameter 28 = Set Point Two Deadband
in Kgs
0 to 2147483.647 0.045
Length in Bytes = 4
• Parameters 29 = Set Point Two Preact in
Kgs
0 to 2147483.647
Length in Bytes = 4