Hardy HI 200DNWM DeviceNet Weigh Module - Manual (Page 40)

HI 200DNWM MANUAL
5-6
• Parameter 30 = Net Weight in Kgs
Read Only
Length in Bytes = 4
• Parameter 31 = Gross Weight in Kgs
Read Only
Length in Bytes = 4
• Parameter 32 = Tare Weight in Kgs
-999999 - 999999 0.00
Length in Bytes = 4
• Parameter 33 = Relay Outputs
Length in Bytes = 1
• Parameter 34 = A/D Counts
Length in Bytes = 4
• Parameter 35 = Calibration Low Weight
in Lbs.
Length in Bytes = 4
• Parameter 36 = Calibration Low Weight
in Kgs.
Length in Bytes = 4
The “Calibration Low Weight” parame-
ter specifies the weight on the scale when
the low step of a calibration is done in
Traditional Calibration and is the Refer-
ence Point for C2 Calibration.
• Parameter 37 = Weight Multiplier
Length in Bytes = 4
This integer parameter can be set to 1,
10, 100, etc. to allow the user to select