ChemoMetec NC-100 - Manual (Page 51)

6 Utilities tab
41
Figure 36 Report header information.
Changes made to the report header will affect the result lists, exported data and the
viability reports. A viability report will only show the changed report header if it was
changed before the first viability calculation of that particular report was saved.
6.6 Default settings for NucleoView
TM
NucleoView offers the possibility to change the default settings used when data is
transferred from a NucleoCounter. See figure 37 for the settings it is possible to change.
1. To change the default settings click the "Change settings" button. This will activate
a dialogue as shown in figure 37.
2. Customize the settings.
3. Click "Save settings". The new settings will be used for the next transfer of data
from a NucleoCounter.