ChemoMetec NC-100 - Manual (Page 25)

4 Measurement tab
15
4 Measurement tab
Measurement is the default start-up tab of NucleoView. In this tab, data and results
transferred from the NucleoCounter are automatically displayed. An example of the
Measurement tab is shown in figure 13.
Once NucleoView has been launched the Measurement tab is automatically displayed.
Usually there are no files in the active session upon start -up. The object intensity
histogram is then replaced with a small text box saying, “Please select a valid folder”. Start
the measurements and the object intensity histogram will appear as in figure 13 or use the
Browse button to navigate to another session (see chapter 4.5 Browse and Today).
Figure 13 The NucleoView Measurement tab.
When results from cell analyses are received from the NucleoCounter, the cell
concentration, image of the NucleoCassette chamber etc. are displayed. Each analysis is
saved on the computers hard disk in a separate data file.