ChemoMetec NC-100 - Manual (Page 16)

1 Installation
6
1.2.1 Removal of NucleoView
TM
- Windows 7
4
To remove the NucleoView software
5
open the NucleoView folder (see Figure 8 Contents of
the NucleoView folder (before uninst000.exe is activated).). The folder should be located
in the root directory of the local hard disk (C:\Nucleoview) if the location was not changed
during the installation.
In the NucleoView folder double-click on “uninst000.exe
6
” and confirm that the
NucleoView software is to be uninstalled. The NucleoView software will then be removed
from your computer. Any saved data will remain on the computer.
Figure 8 Contents of the NucleoView folder (be fore uninst000.exe is activated)
7
.
4
This description applies to Windows 7 only.
5
In order to remove the program correct, first quit the NC Receiver.exe program if it is
running.
6
“uninst000.exe” or “uninst000” depending on your folder settings in your OS.
7
If you at any time created your own Default settings you will also have a file called “NV
default settings.ini”.